qmi8658_advanced_features.ino File Reference

@license MIT License More...

#include <stdarg.h>
#include <ImuDrv.hpp>
#include "DevicesPins.h"

Include dependency graph for qmi8658_advanced_features.ino:

Go to the source code of this file.

Macros
#define	USE_I2C_INTERFACE
#define	IMU_SDA   17
#define	IMU_SCL   18
#define	IMU_IRQ   33

Functions
void	setupPower ()
void	setup ()
void	loop ()

Variables
SensorQMI8658	imu

Detailed Description

@license MIT License

Copyright (c) 2026 lewis he

Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions:

The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software.

THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.

Author

Lewis He (lewis.nosp@m.he@o.nosp@m.utloo.nosp@m.k.co.nosp@m.m)

Date

2026-04-15

Advanced features example using SensorQMI8658.

This example demonstrates how to:

• Use axis conversion for different mounting orientations
• Perform static calibration
• Enable dynamic gyroscope calibration
• Run hardware self-test

Note

Place the sensor in a stable position for static calibration. The sensor should remain motionless during calibration.

Definition in file qmi8658_advanced_features.ino.

Macro Definition Documentation

IMU_IRQ

#define IMU_IRQ   33

Definition at line 83 of file qmi8658_advanced_features.ino.

IMU_SCL

#define IMU_SCL   18

Definition at line 77 of file qmi8658_advanced_features.ino.

IMU_SDA

#define IMU_SDA   17

Definition at line 73 of file qmi8658_advanced_features.ino.

USE_I2C_INTERFACE

#define USE_I2C_INTERFACE

Definition at line 49 of file qmi8658_advanced_features.ino.

Function Documentation

loop()

void loop

(

)

Definition at line 243 of file qmi8658_advanced_features.ino.

References accel, SensorQMI8658::getDynamicGyroCalibrationOffsets(), SensorQMI8658::getStaticCalibrationOffsets(), gyro, imu, SensorQMI8658::isDataReady(), SensorQMI8658::isDynamicGyroCalibrationEnabled(), SensorQMI8658::isStaticCalibrationComplete(), SensorQMI8658::readAccel(), SensorQMI8658::readGyro(), IMUdata::x, IMUdata::y, and IMUdata::z.

setup()

void setup

(

)

Definition at line 119 of file qmi8658_advanced_features.ino.

References accel, SensorQMI8658::ANY_MOTION, ComplexDeviceWithHal::begin(), SensorQMI8658::configAccel(), SensorQMI8658::configGyro(), SensorQMI8658::configMotionDetectDefault(), SensorQMI8658::configPedometerDefault(), SensorQMI8658::configTapDefault(), SensorQMI8658::enableAccel(), SensorQMI8658::enableDynamicGyroCalibration(), SensorQMI8658::enableGyro(), SensorQMI8658::enableStaticCalibration(), FS_1000_DPS, FS_8G, SensorQMI8658::getAxisLayout(), SensorQMI8658::getHardwareSelfTestResults(), SensorQMI8658::getStaticCalibrationOffsets(), gyro, SensorQMI8658::hardwareSelfTest(), imu, IMU_CS, IMU_SCL, IMU_SDA, SensorQMI8658::isDataReady(), SensorQMI8658::isStaticCalibrationComplete(), SensorQMI8658::LAYOUT_DEFAULT, SensorQMI8658::readAccel(), SensorQMI8658::readGyro(), SensorQMI8658::setAxisLayout(), setupPower(), SPI_MISO, SPI_MOSI, and SPI_SCK.

setupPower()

void setupPower

(

)

Definition at line 100 of file qmi8658_advanced_features.ino.

Referenced by setup().

Variable Documentation

imu

SensorQMI8658 imu

Definition at line 115 of file qmi8658_advanced_features.ino.

Referenced by loop(), and setup().