I2CDeviceNoHal Class Reference

#include <I2CDeviceNoHal.hpp>

Inheritance diagram for I2CDeviceNoHal:

Public Member Functions
bool	begin (SensorCommCustom::CustomCallback callback, uint8_t addr)
	Initialize the sensor using custom callback interface.
Public Member Functions inherited from DeviceBeginCommon
virtual	~DeviceBeginCommon ()
uint8_t	getAddress () const
uint8_t	getInterface () const
Public Member Functions inherited from SensorCommWrapper
	SensorCommWrapper ()=default
int	readReg (uint8_t reg) const
int	readRegBuff (uint8_t reg, uint8_t *buf, size_t len) const
int	readBuff (uint8_t *buf, size_t len) const
int	writeReg (uint8_t reg, uint8_t val)
int	writeRegBuff (uint8_t reg, uint8_t *buf, size_t len)
int	writeBuff (uint8_t *buf, size_t len)
int	writeThenRead (const uint8_t *write_buffer, size_t write_len, uint8_t *read_buffer, size_t read_len)
bool	setRegBit (uint8_t reg, uint8_t bit)
bool	clrRegBit (uint8_t reg, uint8_t bit)
bool	getRegBit (uint8_t reg, uint8_t bit)
int	updateBits (uint8_t reg, uint8_t mask, uint8_t value_shifted)
void	setAddress (uint8_t address)
void	setAck (bool enable)
Public Member Functions inherited from SensorCommInterface
virtual	~SensorCommInterface ()=default

Additional Inherited Members
Protected Member Functions inherited from DeviceBeginCommon
	DeviceBeginCommon ()=default
virtual bool	initImpl (uint8_t param)=0
virtual bool	ensureValid () const override
virtual SensorCommBase *	getComm () const override
virtual void	beforeBegin ()
virtual void	afterCommReady ()
virtual void	afterInitSuccess (uint8_t param)
virtual void	onBeginFail ()
bool	fail ()
void	clearCommState ()
template<typename CreateComm >
bool	beginLifecycle (uint8_t addr, uint8_t iface, uint8_t initParam, CreateComm createComm)
Protected Attributes inherited from DeviceBeginCommon
std::unique_ptr< SensorCommBase >	comm
std::unique_ptr< SensorHal >	hal
std::unique_ptr< SensorCommStatic >	staticComm
uint8_t	_addr = 0
uint8_t	_iface = COMM_CUSTOM

Detailed Description

Definition at line 33 of file I2CDeviceNoHal.hpp.

Member Function Documentation

begin()

bool I2CDeviceNoHal::begin ( SensorCommCustom::CustomCallback  callback, uint8_t  addr  )

inline

Initialize the sensor using custom callback interface.

Note

Suitable for other platforms not covered by standard implementations.

Parameters

interface	Communication interface type (COMM_SPI or COMM_I2C).
callback	Register read/write callback function.
addr	Device address

Returns

True if initialization is successful, false otherwise.

Definition at line 94 of file I2CDeviceNoHal.hpp.

References DeviceBeginCommon::beginLifecycle(), DeviceBeginCommon::comm, and COMM_CUSTOM.

Referenced by SensorPCF85063::begin(), SensorPCF8563::begin(), beginPower(), setup(), testInit(), SensorPCF85063::~SensorPCF85063(), and SensorPCF8563::~SensorPCF8563().

---

The documentation for this class was generated from the following file:

• I2CDeviceNoHal.hpp